1-3/8” x 1-1/16" Trailer Hub – 6 Lug on 5.5” Painted Assembly (68149/44649 S-17255)

6 Lug on 5.5” Painted Trailer Hub Assembly for 1-3/8” x 1-1/16” Spindles

Painted Trailer Hub for boat or utility trailer use. This 6 lug painted trailer idler hub fits on a 1-3/8” x 1-1/16” trailer spindle and can be used on axles with 3,000-3,500 pound capacities. Always double check your current trailer hub to match up the proper trailer bearings. 

Each 6 Lug Painted Trailer Hub includes the inner and outer trailer bearings, double lip seal, and dust caps. All trailer hubs have the appropriate trailer race already installed for easier installation of your trailer hub. For added convenience we have included two different double lip seals to ensure that you have everything needed to replace your hub on your trailer spindle just make sure to test out which seal is the proper one.

Take a look at Champion Trailers Hub Packing and Pre-Loading Procedure for proper and safe trailer hub installation.

Trailer Hub Specifications:

Inner Trailer Bearing Number: L68149 (1-3/8” ID)

Outer Trailer Bearing Number: L44649 (1-1/16” ID)

Inner Trailer Race Number: L68111

Outer Trailer Race Number: L44610

Bolt Pattern: 6 lug on 5.5”

Hub Bore ID: 1.98”

Hub Height: 4.25”

Trailer Hub Kit Includes:

1-Painted 5 Lug on 5.5” Idler Hub

1-L68149 Trailer Bearing

1- L44649 Trailer Bearing

1-L68111 Trailer Race

1-L44610 Trailer Race

1-17255TB Double Lip Seal

1-168255TB Double Lip Seal

1-1.98 Plain Metal Dust Cap

1-Black Iron Cotter Pin

1-Tang Washer

6- ½-20” Zinc Lug Nuts